View EC2645ETTS-40000M_4228655.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

EC26 Series
* RoHS Compliant (Pb-Free) * Ceramic SMD package * 3.3V supply voltage * LVHCMOS/TTL output * Stability to 20ppm * Standby Function * Available in tube or tape and reel
ELECTRICAL SPECIFICATIONS
EC26
H 1.6 L 7.0 W 5.0
OSCILLATOR
1.544MHz to 125.000MHz and 125.009MHz, 125.00937MHz, 125.010MHz, 127MHz, 128MHz, 130MHz, 132MHz, 133MHz, 133.333MHz, 137.472MHz, 142.850MHz, 150MHz, 155.520MHz and 156.250MHz Operating Temperature Range Frequency Tolerance/Stability options of 100ppm, 50ppm, 25ppm, 20ppm available -10C to 70C -40C to 85C Frequency Tolerance/Stability options of 100ppm, 50ppm, 25ppm available Frequency Tolerance/Stability option of 20ppm available from 1.544MHz to 106.250MHz -40C to 85C -55C to 125C Storage Temperature Range 3.3VDC 10% Supply Voltage (VDD) 10mA Maximum Input Current 1.544MHz to 32.000MHz 18mA Maximum 32.000001MHz to 50.000MHz 20mA Maximum 50.000001MHz to 70.000MHz 40mA Maximum 70.000001MHz to 125.000MHz 60mA Maximum 125.009MHz to 156.250MHz 100ppm Maximum Frequency Tolerance / Stability Inclusive of all conditions: Calibration Tolerance at 25C, 50ppm Maximum Frequency Stability over the Operating Temperature Range, 25ppm Maximum Supply Voltage Change, Output Load Change, First Year Aging 20ppm Maximum at 25C, Shock, and Vibration 90% of VDD Minimum Output Voltage Logic High (VOH) w/HCMOS or TTL Load , IOH= -8mA 10% of VDD Maximum Output Voltage Logic Low (VOL) w/HCMOS or TTL Load, IOL= +8mA 5 nSeconds Maximum Rise / Fall Time 10% to 90% of Waveform w/15pF HCMOS Load or 0.4VDC to 2.4VDC w/10LSTTL Load < 35.000MHz 7 nSeconds Maximum 10% to 90% of Waveform w/30pF HCMOS Load or 0.4VDC to 2.4VDC w/10TTL Load < 35.000MHz 10% to 90% of Waveform w/HCMOS Load or 0.4VDC to 2.4VDC w/TTL Load 35.001MHz to 125.000MHz 5 nSeconds Maximum 3 nSeconds Maximum 10% to 90% of Waveform w/HCMOS Load > 125.009MHz 50 10(%) (Standard) Duty Cycle at 50% of Waveform w/HCMOS Load or 1.4VDC w/TTL Load < 70.000MHz 50 10(%) (Standard) at 50% of Waveform w/HCMOS Load > 70.000MHz 50 5(%) (Optional) at 50% of waveform w/HCMOS Load or w/TTL Load < 125.000MHz 50 5(%) (Optional) at 50% of waveform w/HCMOS Load, at 25C, at 3.3Vdc > 125.000MHz 10TTL or 30pF HCMOS Load Max. Load Drive Capability <35.000MHz 10TTL or 15pF HCMOS Load Max. 35.000001MHz to 70.000MHz 15pF HCMOS Load Maximum >70.000001MHz Enables Output Tri-State Input Voltage No Connection Enables Output VIH :70% of VDD Disables Output: High Impedance VIL :30% of VDD 10A Maximum Standby Current Disabled Output: High Impedance 10 mSeconds Maximum Start Up Time 1pSeconds Maximum RMS Phase Jitter 12kHz to 20MHz offset frequency
MANUFACTURER CATEGORY SERIES PACKAGE VOLTAGE CLASS REV.DATE
Frequency Range
ECLIPTEK CORP.
OSCILLATOR
EC26
CERAMIC
3.3V
OS30
01/06
800-ECLIPTEK www.ecliptek.com for latest revision
Specifications subject to change without notice.
PART NUMBERING GUIDE EC26 00 ET T TS - 40.000M TR
FREQUENCY TOLERANCE / STABILITY 00=100ppm Maximum (Standard) 45=50ppm Maximum, 25=25ppm Maximum 20=20ppm Maximum OPERATING TEMPERATURE RANGE Blank=-10C to 70C (Standard) ET=-40C to 85C PACKAGING OPTIONS Blank=Bulk, TR=Tape and Reel (Standard) FREQUENCY OUTPUT CONTROL FUNCTION TS=Tri-State DUTY CYCLE Blank=50 10(%) (Standard), T=50 5(%)
MECHANICAL DIMENSIONS
ALL DIMENSIONS IN MILLIMETERS
SUGGESTED SOLDER PAD LAYOUT
ALL DIMENSIONS IN MILLIMETERS
TAPE AND REEL DIMENSIONS
ALL DIMENSIONS IN MILLIMETERS
Pin 1: Tri-State Pin 2: Case Ground
Pin 3: Output Pin 4: Supply Voltage
Tolerances = 0.1
TAPE
A
16+.3-.1
B
7.5.1
C
6.75.1
D
4 .1
E
2.1
F
REEL
M
1.5 MIN
N
50 MIN
O
20.2 MIN
P
13.2
Q
40 MIN QTY/REEL 1,000
F
8.1
G
B0*
H
1.5 +.1-0
J
A0*
K
.3 .05
L
K0*
R
2.5 MIN
S
10 MIN
T
22.4 MAX
U
360 MAX
V
16.4+2-0
*Compliant to EIA 481A
ENVIRONMENTAL/MECHANICAL SPECIFICATIONS
MARKING SPECIFICATIONS Line 1: ECLIPTEK
Characteristic Fine Leak Test Gross Leak Test Mechanical Shock Vibration Solderability Temperature Cycling Resistance to Soldering Heat Resistance to Solvents
Specification MIL-STD-883, Method 1014, Condition A MIL-STD-883, Method 1014, Condition C MIL-STD-202, Method 213, Condition C MIL-STD-883, Method 2007, Condition A MIL-STD-883, Method 2002 MIL-STD-883, Method 1010 MIL-STD-202, Method 210 MIL-STD-202, Method 215 Line 2: XX.XXX M
Frequency in MHz (5 Digits Maximum + Decimal)
Line 3: XX Y ZZ
Week of Year Last Digit of Year Ecliptek Manufacturing Identifier
MANUFACTURER
CATEGORY
SERIES
PACKAGE
VOLTAGE
CLASS
REV.DATE
ECLIPTEK CORP.
OSCILLATOR
EC26
CERAMIC
3.3V
OS30
01/06
800-ECLIPTEK www.ecliptek.com for latest revision
Specifications subject to change without notice.
- Lower Cost, Quicker Delivery Alternative! The EMOTM family of oscillators offers exceptional performance, shorter delivery and significant cost advantages by utilizing a revolutionary new MEMS resonator technology. This important innovation enables Ecliptek to offer the ultimate in flexibility with delivery of 2 days for samples and 5 to 10 days for quantities up to 10,000 pieces on tape and reel.
Ecliptek MEMS Oscillators
Supply Voltage (VDC) 1.8 2.5 3.3
Package Dimensions (all dimensions in millimeters) 5x7 EMK11 EMK12 EMK13 3.2 x 5 EMK21 EMK22 EMK23 2.5 x 3.2 EMK31 EMK32 EMK33 2 x 2.5 EMK41 EMK42 EMK43
Would you like to request EMOTM samples or a quotation now? Click Here Want to learn more about the Ecliptek EMOTM family of MEMS oscillators? Click Here Product Features:
* * * * * * * * *
Improved frequency stability through the use of a MEMS resonator 1.8VDC, 2.5VDC, or 3.3VDC supply voltages Frequency range of 1MHz to 125MHz, HCMOS output Frequency stability to 50ppm, -40C to +85C operation Tri-state or power down functions RoHS compliant High temperature +260C reflow capability EIA compliant tape and reel packaging Four SMD package sizes
If you have any questions or would like additional information regarding the Ecliptek EMOTM family of oscillators, please contact our Sales Department.

▲Up To Search▲

Price & Availability of EC2645ETTS-40000M

	To Download EC2645ETTS-40000M Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .